Microsoft Fixes Windows Bug Causing Passwords to Be Forgotten

Among the issues Microsoft has recently acknowledged concerns the way in which passwords are kept in the OS, because the company said in some cases, Outlook and other apps won’t remember your passwords.

Which apparently happens on Windows 10 version 2004 after installing Windows updates, using the company explaining within an advisory the whole thing is caused by some specific tasks running around the system. Therefore the workaround would be to just disable these tasks until a fix lands.

The good thing is the fix is already being tested as part of the Insider program, according to a Microsoft engineer, though for now, an ETA regarding when it may go live for everyone is not available.

“This issue is the place some Windows 10 Task Scheduler Tasks are configured in a certain way. Until a fix is available a workaround is to disable these tasks using Task Scheduler,” Microsoft says.

Fix on its way

Eric Lawrence, Microsoft Edge Program Manager, explains in a post (via WL) that only a small number of devices have been affected by this problem.

“1. This issue in Windows affects merely a comparatively few users with S4U tasks.2 . This problem is bound within the latest Windows 10 insider channel. 3. This issue is slated to become fixed within an upcoming update for those Windows 10 users,” he explained.

As said, the workaround that you can use in the meantime is dependant on disabling the scheduled tasks that create the issue, and full instructions regarding how to get it done are provided on the page mentioned above.

What you need to know, however, is that you may have to re-enter the missing passwords after using the workaround, due to the fact you’ll need Windows to become provided with the phrase once again before actually saving it.

Google Turns to Windows 10 Tech to Fix Chrome’s Biggest Problem

It’s a well known fact Google Chrome is among the biggest memory hogs on Windows, and despite the several attempts from the search company to deal with it, the browser continues to be eating a lot of resources when running on the device powered by Microsoft’s operating-system.

And now Bing is trying to embrace a different approach, turning to a bit of tech bundled with Windows 10 to complete everything.

Google Chrome would make use of the Windows 10 TerminateProcess API to shut down browser processes, essentially having the ability to suspend the duties that will otherwise continue to consume resources within the browser.

“Exiting a procedure cleanly is tough and dear. Avoiding race conditions becomes almost impossible with complex software and a clean exit can be quite slow. Waiting on all threads, paging in code and data, and race conditions make it not worthwhile,” Google says inside a commit discovered by Tom’s Guide.

“We have been gradually moving towards using TerminateProcess for more process types. Although the majority of the shutdown processes tracked by this bug are in utility processes this transformation uses TerminateProcess for those process types. We should not need to let destructors run so it should be safe to never use exit() (in order to make it opt-in).”

Still a piece in progress for the moment

If this new feature is projected to reach the development channel is something that continues to be to be seen, until then, the good thing is Google is still working on methods to optimize the resource usage of its browser.

In the long term, this is an improvement which comes in handy not just to Google Chrome users alone, but to everyone else running a Chromium browser, for example those committed to the brand new Microsoft Edge too.

How to Create New Power Plan on Windows 10

For better treatments for the power plan, you can create a brand new custom power plan in Windows 10. Here are the steps you should follow to do this.

Automatically, Windows has two different power plans. Those are the Balanced power plan and also the High-Performance power plan. When needed, you will soon switch between these power plans to meet your present workflow as efficiently as possible.

Because the names imply, the balanced power plan provides you with a good balance between power consumption and gratifaction while the high-performance plan prioritizes performance over power consumption. For the majority of users, both of these default power plans are pretty much all they require. Due to the fact most workflows fit into these two power plans.

However, for those who have a unique use case, you may create a brand new power plan within the Windows User interface. Using the new custom power plan, you can change the sleep settings, display settings, battery settings, custom background settings, etc. The custom power plan’s also useful if you don’t want to modify an existing power plan. After you have a new power plan, you can then change to it in the same Control Panel or from using a command-line script.

In this quick guide, allow me to share with you the steps to create a new power plan in Windows from Control Panel.

Steps to produce new power plan in Windows

To produce a new power plan, stick to the steps the following.

Open the User interface.
Set “View by” to “Large icons”.
Find and click on the “Power options” link.
Click around the “Create power plan” link.
Type a reputation within the field and click on “Next”.
Click the “Create” button.

Detailed steps

As I said before, you may create a brand new power plan from the user interface itself. Listed here are detailed steps you should follow.

1. First, open the Control Panel. You can do that by trying to find “Control Panle” within the Start menu.

2. After opening the user interface window, click on the “Power options” option. If you fail to find the option, ensure that the “View by” appearing in the top-right corner is placed to “Small icons” or “Large icons”.

3. Within the power options page, click the “Create power plan” link on the left sidebar.

4. Now, type a name within the Name field. You can name the power plan anything you like. Just make sure that it is a couple days. Click on the “Next” button to carry on.

5. The brand new plan takes the Balanced plan as the base. So, you will see the default settings for “Turn off display” and “Sleep” options already set. Allow the defaults be for the time being and then click the “Create” button.

That is all. As soon as you click on the Create button, the new power plan’s created. In fact, the brand new power plan’s automatically activated. in the User interface.

If you want to, you can change the newly created power plan by clicking on the “Change plan settings” link.

To alter advanced power settings, click the “Change advanced power settings” link.

This action will open the advanced settings window where one can alter the sleep, hibernation, display, battery, along with other settings.

Delete power plan in Windows

If you no longer require the custom power plan, you can delete it simply as quickly. Follow the below steps.

Open the Control Panel.
Set “View by” to “Large icons”.
Find and click on the “Power options” link.
When the plan you need to delete happens to be active, select another plan.
Next, click the “Change plan settings” link.
Click the “Delete this plan” link in this page.

That’s all.

Download KB4592449 Offline Installer for v1909 & v1903

KB4592449 has become readily available for both Windows 10 1909 & 1903 versions. Listed here are the hyperlinks to download KB4592449 offline installer from Microsoft.

Of course, Microsoft released a slew of new cumulative updates included in the patch Tuesday. KB4592449 update for v1909 and v1903 users and KB4592438 for v20H2 and v2004 users. Unlike the previous cumulative updates, the KB4592449 update is fairly small but contains important security fixes for various parts of Windows 10. Mainly, the KB4592449 has security fixes for the File Explorer, Edge legacy browser, Office products, Windows virtualization, Windows Fundamentals, etc.

As being a security update, it does not contain any other improvements or fixes. As such, the KB4592449 update shouldn’t cause any big issues for a vast majority of users. So, it is best to set up the update as quickly as possible to prevent any security issues and vulnerabilities.

To install the update from the Settings app, open it up, visit the “Update & Security → Windows Update” and then click the “Check for updates” button. Alternatively, you can let Windows install the update while using automatic updates feature. If not, download the KB4592449 offline installer while using links provided below.

Download KB4592449 offline installer

To make things simpler for you, I found the direct download links for KB4592449 for Windows 10 32-bit and 64-bit systems. Based on the body type, download the update using the below links and do the installation like any other Windows software. After installing, restart the system and you’re simply all set.

If you want KB4592449 download links for Windows Server, ARM64 based systems, or some other version go to the Microsoft update catalog website to find the proper links. All you have to do is click the Download button near the appropriate version.

KB4592449 changelog

Security updates to Microsoft Edge Legacy, the Microsoft Graphics Component, Windows Media, Windows Fundamentals, and Windows Virtualization.

That’s it.

How to Set Individual DPI Scaling in Multi-Monitor Setup

When utilizing a multi-monitor setup, you can set DPI scaling for each monitor individually. Here’s how to set DPI scaling inside a multi-monitor setup.

One of the bigger Windows pain points is its DPI scaling. Depending on the monitor resolution and size, you have to set an effective DPI scaling to create Windows usable. The DPI scaling could be a bigger condition in multi-monitor setups. After all, thanks to the global work-from-home requirement nowadays, multi-monitor setups have grown to be pretty common. One of the most popular combinations being the laptop connected to an external monitor.

Typically, Windows is fairly good at detecting the monitor size and resolution and setting the right DPI scaling. The automated DPI scaling is also applicable to the multi-monitor setup. This is true even when the monitors are of different resolutions and sizes.

When the automatic scaling isn’t being employed as intended, you can manually set DPI scaling for individual monitors inside a multi-monitor setup. Thankfully, Windows 10 made it easy to set different DPI scaling for different monitors inside a multi-monitor setup. Here’s how you can get it done.

Steps to set individual DPI scaling inside a multi-monitor setup

To alter DPI scaling for multiple monitors, stick to the steps the following.

Open the Settings app.
Click around the “System” option.
Select the “Display” tab around the sidebar.
Select the monitor underneath the “Rearrange your displays section”.
Choose the recommended DPI setting from the “Change the size of text, app, and other items” dropdown menu.
If prompted, click the “Keep changes” button.

Detailed steps

1. First, open the Windows 10 settings app. You can do that by pressing the “Windows Key + I” keyboard shortcut. As needed, you may also search for “Settings” within the Start menu too.

2. Within the Settings app, visit the “System” page. On the system page, click the “Display” tab around the sidebar. As the name suggests, this is when you’ll find all the settings associated with your display.

3. Around the Display page, select the monitor that you wish to change the DPI scaling. Generally, “monitor 1” will probably be your main screen. In my case, I want to alter the DPI scaling on the second monitor. So, I decided the number 2 monitor.

4. After choosing the monitor, scroll down and choose the recommended DPI scaling in the “Change how big text, app, and other items” dropdown menu. As needed, you are able to test out other DPI settings to see what works for you.

5. To verify the alterations, Windows might show a confirmation window. Click the “Keep changes” button to verify the new DPI scaling setting.

That is all. In the future, the computer monitor may have the brand new DPI scaling. If you have more monitors to setup, follow the same steps to set the DPI scaling for individual monitors. Some already opened applications may not recognize the DPI changes. In those cases, close and reopen the application.

Identify monitors

If you fail to pick which monitor number below to which monitor, you can make Windows identify them. Around the Display page, click the “Identify” button. As soon as you click on the button, Windows will show big numbers as an overlay in your monitors. These numbers match the computer monitor numbers on the Display page.

NVIDIA 460.97 GeForce Hotfix Driver Expires for Grabs – Download Now

NVIDIA has provided a brand new GeForce graphics release, namely 460.97 hotfix, which removes an insect that prevented apps that use NVML from detecting GPUs and fixes stuttering observed with some configurations in Marvel’s Avengers.

Moreover, the current update also resolves the Lenovo Y740 display corruption seen when waking from sleep, corrects black levels when HDR is enabled, and ensures notebooks won’t encounter a BSOD when waking from sleep while connected to external monitor via dock/dongle.

In terms of files, this era includes two packages: one DCH and one Standard executables ideal for both notebook and desktop configurations powered by the 64-bit variant of Microsoft’s Windows 10 operating system.

As for installation, save the appropriate package for your configuration, close all programs and processes that may hinder the upgrade, run the executable, wait for all files required for the installation to be extracted, and follow all instructions displayed on the screen for a complete installation.

Finally, when the upgrade has finished, it might be a good idea to execute a system reboot to permit all changes to consider effect properly. If this task isn’t requested automatically by the wizard, however, be sure to carry it out manually.

Having said that, download NVIDIA GeForce Graphics Driver 460.97 Hotfix, put it on on your device, and enjoy your newly-improved system. Also, check back around as frequently as you possibly can to remain up to date using the latest releases.

How to Roll Back Nvidia Driver in Windows 10

When the latest Nvidia driver is causing problems, follow the steps in this short article to roll back the Nvidia driver in Windows 10.

If you have an Nvidia graphic card, is fairly common to get frequent driver updates. Though the regular graphics driver updates are good and even necessary to make the most from your GPU, there can be situations in which the opposite holds true. For instance, the brand new driver may not be compatible with your particular CPU or it introduced new bugs that cause a performance drop on some or all games and other productive tasks like video editing. Not only that but some issues within the motorist may also bring unexpected problems that can cause BSoD errors. Put simply, although the frequent driver updates are good, it is also important that you give the new update serious amounts of mature before installing.

Nevertheless, if you have installed a brand new Nvidia driver update which is causing problems or if the new feature(s) isn’t to your liking, it is simple to roll back the Nvidia driver update.

In this simple guide, allow me to show you the steps to roll bar the Nvidia driver update in Windows 10.

Steps to Roll Back Nvidia Driver Update

You are able to roll back the Nvidia driver update in the Windows Device Manager. Here’s how.

Open the Device Manager.
Double-click on “Display adapters”.
Double-click around the “Nvidia driver”.
Go towards the “Driver” tab.
Click around the “Roll Back Driver” button.
Click “Yes” within the confirmation window.

Detailed Steps

1. First, right-click on the Start menu. This course of action will open the Power User menu. From this menu, select the “Device Manager” option.

2. After opening the unit Manager, double-click on the “Display Adapters” option. This is when you will find the Nvidia driver entry.

3. Under the display adapters section, double-click in your Nvidia driver. Depending on what type of Nvidia graphics card you’ve, you might visit a different entry. Also, if you have mulple graphics drivers, you may see multiple entries.

4. In the properties window, click on the “Driver” tab.

5. Once you are in the driver tab, click on the “Roll Back Driver” button.

6. Windows might ask you for a confirmation. Make a choice of the options based on your situation and click on the “Yes” button. If you don’t want to, it’s not necessary to select any option.

As soon as you click on the button, Windows starts to restore the prior form of the Nvidia driver. The entire process can take a few minutes and the system might restart itself many times.

Once the roll back is done and also the product is restarted, you should use the computer as always.

If you wish to, you may also configure Windows 10 stop automatic driver updates. This way, you don’t have to be worried about Windows 10 automatically installing the new form of the graphics driver. Stoping automatic driver update isn’t a requirement, it’s really a useful tip if you just don’t want to install the brand new driver update automatically under any circumstances.

Note: If the “Roll Back Driver” button is greyed out. i.e, if you are unable it click it, it’s possible that Windows does not have the prior version. In those cases, you need to fully uninstall the motive force in safe mode and then reinstall it normally.

9 Easy Methods to Open File Explorer in Windows 10

Knowing new ways to open File Explorer gives you much-needed flexibility in various tasks. Here are some of the must-know methods to open File Explorer in Windows 10.

File Explorer is one of the most important parts of Windows. It allows you to definitely browse your folder structure and manage all your files. In fact, most of us use File Explorer many times on a day. For the most part, many of us a favorite way to open File Explorer. However, do you know that Windows gives you a number of different ways to open the File Explorer?

Knowing multiple different ways to access File Explorer can help you in tight and excitement. That will help you with this, here are some must-know ways to open File Explorer in Windows.

1. Press Start Key + E

Among the simplest ways to open File Explorer would be to press the “Start key + E” shortcut. Should you open File Explorer often, there isn’t any better way than the usual dedicated keyboard. This is also true if you want to use keyboard shortcuts when compared with point and click.

When i state Start key, I’m talking about the key when the windows are logo on it

2. Click the File Explorer icon on taskbar

By default, the File Explorer is pinned to the taskbar. Without notice to open the File Explorer, just point the mouse cursor on the File Explorer icon on the taskbar and left-click. This action will immediately open the File Explorer. If you want to, you may also open multiple File Explorer windows by holding down the Shift key while clicking.

3. Search for “File Explorer” in the start menu

You may also search for File Explorer in the Start menu. This is extremely useful if you cannot use the keyboard shortcut or maybe there is not File Explorer icon on the taskbar.

Open the Start menu and type “File Explorer”. Click on the File Explorer search result to open it.

4. Click File Explorer icon within the start menu

The Start menu also has a dedicated icon to quickly open the File Explorer. Just open the Start menu and then click the “File Explorer” icon appearing towards the leftmost side from it.

If you cannot discover the File Explorer icon on the Start menu. It may be disabled. To enable it, open the Settings app with the “Windows Key + I” shortcut and go to “Personalization ?¨² Start menu”. Here, click on “Choose which folders show up on the Start” and switch on the “File Explorer” option.

5. Open File Explorer from the power user menu

The power user menu too includes a dedicated choice to access File Explorer. First, right-click on the Start menu. From the list, choose the “File Explorer” choice to open it up.

6. Run command to spread out File Explorer

The run dialog box gives you quick access to the File Explorer. This method is particularly useful once the File Explorer is unresponsive.

First, open the beginning menu, search “Run” and open it up. Within the blank field, type “explorer” and press “Enter”.

7. Open File Explorer using Task Manager

Though this isn’t a well-known method, you can actually access the File Explorer from the task manager itself. In fact, this method is very like the Run method shown above.

First, right-click around the taskbar and select “Task Manager”. Now, select the “File ?¨² Run task”. Type “explorer” within the blank field and click on “Ok”.

8. Run File Explorer from Command Prompt

Like with any enter in Windows, you can access File Explorer from the Command Prompt.

First, search and open “Command Prompt” from the Start menu. Within the command window, type “explorer” and press Enter.

9. Run File Explorer from PowerShell

Much like using the Command Prompt, you may also access File Explorer from PowerShell. First, search and open “PowerShell” from the beginning menu. In the PowerShell window, type “explorer” and press Enter.

That is all. If you feel I missed every other cool methods to open the File Explorer in Windows, do allow me to show.

How to Force Quit Program in Windows 10 (Kill Program)

If your program, application, or app isn’t responding, you can force quit it. Here’re the steps to force quit an app or enter in Windows 10.

When a program is running either in the foreground or background, if it encounters an unrecoverable error or if there is something wrong with how it functions, it will freeze and not respond. Actually, when a program is not responding, Windows shows the “Not Responding” message on the title bar. Quite often, a program that is in a Not Responding state might abuse the machine resources like CPU, Memory, and Hard Disk.

Whenever a program or app is not responding, you can either have force quit or close the application. Typically, Windows tries to safely close or recover this program just so that you don’t lose any potential unsaved work or data. However, if Windows takes too much time or maybe this program is using up all the system resources, you are able to manually force quit the app. There are a variety of the way to get it done. I’ll show how you can kill a process or force quit a credit card applicatoin using task manager and Command Prompt.

Without further ado, let me show the steps to make quit app or enter in Windows 10.

Steps to make Quit Program from Task Manager

The task manager supplies a simple method to quickly force quit or kill a not responding program or app. Listed here are the steps you need to follow.

Right-click around the taskbar.
Select the “Task Manager” option from the list to spread out the Task Manager.
Go to the “Processes” tab in the task manager.
Here, find and choose the process you need to end. When the process is the Not Responding state, you will see “(Not Responding)” next to the process name.
After selecting the process, click on the “End Task” button.
If the thing is a warning message, click on the “Ok” button.
Close the Task Manager.

That’s all. Once you click the End Task button, Windows will force close this program. The effect will not be instant and may take a couple of seconds to quit the application. So, don’t be concerned when the application did not close immediately.

Force Quit Application from Command Prompt with TaskKill Command

You can force quit or kill any process from the command line. For your, you need to use the TaskKill command along with the PID (Process ID) or process name of the program or app you want to force quit.

Open the beginning menu.
Search for “Command Prompt”.
Right-click on the Command Prompt and choose the “Run as administrator” option.
After opening the improved cmd window, type “tasklist” and press Enter.
Make a note of the procedure name from the program you need to force quit.
Next, execute the below command to force quit the app in Windows 10. Replace “<program>” using the actual program/process name you got with the tasklist command.
taskkill /im “<program>.exe”
Close the command window.

That’s all. As soon as you execute the command, Windows will kill that process or program. Much like using the task manager, the effect will not be instant and could have a matter of moments to stop the application. So, don’t be concerned if the application did not close immediately.

New Graphics Driver Released by Intel – Download Version Beta

Intel has presented a new form of its High Definition Graphics driver, namely the Beta DCH update, which installs a brand new installer framework having a redesigned UI and reduces stuttering in Fortnite on 7th Generation Core CPUs and better.

In addition to that, the current release resolves crashes and hangs encountered in Assassin’s Creed Valhalla, Tom Clancy’s The Division 2, Tom Clancy’s Rainbow Six Siege, and Shadow from the Tomb Raider titles.

Moreover, the 9077 beta update also fixes minor graphic anomalies observed in Hitman 2, Rise from the Tomb Raider, Forza Motorsport 6, Battlefield V, Arma 3, and Fortnite (Battle Royale Mode), along with the window flickering and resizing when playing Red Dead Redemption 2.

However, be aware that this latest version might still encounter some issues with games for example Watch Dogs: Legion, Tom Clancy’s Ghost Recon Breakpoint, Call of Duty: Black Ops Cold War, Halo 3: ODST, and other titles as highlighted in the Release Notes below.

When it comes to compatibility, Intel’s update is only ideal for DCH configurations running Microsoft’s 64-bit architecture of Windows 10 operating systems, and including a supported CPU model.

When it comes to installation, first make sure the body is valid for this motorist, save and run the downloadable executable, and follow all instructions displayed on-screen for a complete and successful upgrade.

Moreover, once finished, it might be a good idea to perform a system reboot to allow the changes to take effect. If the task isn’t requested, however, be sure to carry it out manually.

That said, download Intel Graphics Driver Beta for Windows 10 DCH 64-bit, put it on, and constantly check our web site to function as the first to understand whenever a newer and stable version can be obtained for your device.